Description
For this third edition, the iconic F-ONE STRIKE V3 has been reworked in three areas: materials, placement of these materials and overall design to improve performance and durability.
MATERIALS
The inflatable structure of the F-ONE STRIKE V3 is made of HITEX 158g and 178g. This brand-new high tenacity polyester exclusive to F-ONE offers great resistance to elongation and therefore greater durability and performances.
The central strut is thinner in diameter thanks to the HITEX 158g and its independent valve that allows for a better control of its pressure. Its longitudinal reinforcements help command its shape and resistance.
The four central segments of the leading edge on each side of the strut are made of HITEX 178g, while the four outer segments nearer the wingtips are in 158g. Both materials are perfectly distributed to account for the different tensions, high pressures, and weight distribution in this area.
Since the beginning, we have also kept a thin leading edge diameter at the wingtips, bringing agility, comfort and glide, but also lightness and less inertia.
In addition to the new HITEX, we have developed a thicker TECHNOFORCE™/D2 in 66g for the trailing edge where tensions are important and resistance essential. The rest of the wing’s canopy is in TECHNOFORCE™/D2 in 52g.
WING DESIGN
Through Sail Engineering, we have conceived a completely new design; everything has been precisely thought-out to adapt the wing’s shape to the tensions and new materials.
Every panel on the STRIKE V3 is precisely laid to carry a specific load. The front of the wing combines horizontal panels separated by a vertical seam from the innovative radial center panels, which are mapped to accurately follow every load trajectory. The trailing edge is controlled by a vertical panel in 66g. Small radial cuts are also implemented on the wingtips and on the back of the strut to spread tensions. Aligning the fibre exactly along the load paths means that stretch can be controlled to a never-before-seen level on a wing.
Thanks to this precise load management, the wind range of the STRIKE is extended at both the high and low end, and the range of wind strengths where the wing feels perfect is greater than ever before.
With our staggered seams, the fabric and its seams work better to keep a smooth and efficient profile and the flying shape of the wing never deforms under load. The control of the profile is ideal, especially in the high end where stability is superb to ride fully balanced on both arms and in total comfort.
The new trailing edge tensions and radial cuts have brought incredible performance and control. Located on the back of the strut, our innovative Load Diffuser made of overlapping panels of hard Mylar and Dacron further helps maintaining the profile sleek and efficient, leading to the ultimate stability, performances, and longevity.
DURABILITY
Every reinforcement on this wing has been reviewed to ensure durability and to save weight.
Because the STRIKE V3 delivers stability beyond compare, it allows a flatter dihedral angle and reaches a bigger projected area. In turn, the power and pumping abilities are even more improved for planing starts. This allows riders to use a smaller wing or board than before.
A new and slightly more compact outline with less span makes the F-ONE STRIKE V3 easier to pump and ride. The center of traction has been perfectly placed right in front of the rider to guarantee a perfect balance on both arms.
Finally, all profiles have been revised to accommodate our new parameters. We were able to slightly reduce the V3’s profile thickness to bring even more comfort and control in strong winds. The high end potential of this wing is impressive, with an effective forward traction that won’t let you overexert yourself even when overpowered.
HANDLES
To further improve and optimize the rider’s control, we have rigidified our wing handles whilst keeping our original, lighter construction. And still incorporating no hard parts that could damage you, your wing, or ding your board. Grippy, ergonomic and comfortable, the handles allow for some flexibility, so your wrist is always in line with your arm.
This also gave us the opportunity to design the strut just the way we like it. With the front descending straight away on your front hand, and rising into the wing’s profile near your back hand. This leads to a more natural position for sheeting in.
PERFORMANCE AND CONTROL
Thanks to its new design and precise fabrics placement, the STRIKE V3 is a masterpiece of aerodynamism. The perfect control of the profile and deformations guarantees unforgettable sessions.
We kept the STRIKE’s lightweight and unique freefly stability. This means you can remain focused on your trajectory and foil, whilst enjoying long surfs or downwinds.
In your hands, its legendary planing and pumping power are even better. When on the water, the upwind abilities are impressive with an incredibly consistent traction. This wing’s upwind performance is overall greatly enhanced throughout the wind range.
If you like to glide and go fast in total control and comfort, the STRIKE V3 brings performance and stability. For freestyle and jumping, the height and lift will surprise you and all landings will be easier.
Virtually a brand-new wing, the V3 pushes performance into new territories. Satisfying riders of the highest level, the STRIKE is also incredibly accessible to anyone wanting to discover wing foiling.
The STRIKE V3 has it all and is yet again ahead of the game. Be the first to pick the third.
Available in: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5 m²
